Meter Reading Instructions Select your manufacturer* Hitachi Konica Minolta Kyocera Mita Dataproducts Minolta Samsung Panasonic Ricoh Sharp Hitachi Meter Reading InstructionsHitachi I55 - The meter is near the power button Hitachi DDC62N - The meter is halfway down on the big door, or utility button, meter count Hitachi DDC52 - The meter is near the power button Hitachi DDC62 - The meter is near the power button Hitachi DDS32 - Push Online Key on front panel to turn the machine offline, then push Print Status button. 4 pages will print, the meter will print on the top right corner of the 1st page. Hitachi DDS50 - The meter is near the power buttonKonica Minolta Meter Reading InstructionsKonica 1216 - Meter is located behind and below bypass tray on the outside of the copier Konica 2223 - Meter is inside the front door, on the bottom left hand corner (if that doesn't work) press "p" button and then #1, meter will come up Konica 7020 - Open the door on the right side of the copier. It looks like an odometer in the top right hand corner. Look hard - it's small. Konica 7025 - Open the door on the right side of the copier. It looks like an odometer in the top right hand corner. Look hard - it's small. Konica 7030 - Open the door on the right side of the copier. It looks like an odometer in the top right hand corner. Look hard - it's small. Konica 7033 - Open the door on the right side of the copier. It looks like an odometer in the top right hand corner. Look hard - it's small. Konica 7035 - Open the door on the right side of the copier. It looks like an odometer in the top right hand corner. Look hard - it's small. Konica 7040 - Open the front panel. The meter is along the top, left of center. Konica 7045 - Open the front panel. The meter is along the top, left of center. Konica 7055 - Open the front panel. The meter is along the top, left of center. Konica 7060 - Open the front panel. The meter is along the top, left of center. Konica 7065 - Open the front panel. The meter is along the top, left of center. Konica 7075 - Open both of the two front doors, the odometer is inside. Konica 7085 - Open front doors. In the upper left corner the black box has odometer. Konica 7115 - Push "Counter" button on the control panel. All meters will show. Konica 7118 - Push "Counter" button on the control panel. All meters will show. Konica 7130 - Open door on the right side of the copier. The meter looks like odometer in top right hand corner. It's small. Konica 7133 - Open front door, in the upper left corner, the black box has odometer. Konica 7145 - On the right side of copier, open the door. Odometer is in the upper right corner. Konica 7155 - Open front door, in the upper left corner the black box has odometer. Konica 7165 - Open the door on the left side of the copier. The black box in the left corner has odometer Konica 7150 - Open the front door, the odometer is inside. Konica 7915 - Press the utility button and then meter count Konica 7920 - Press the utility button and then meter count Konica 8020 - Press the utility button and then meter count Konica 8030 - Press the Utility button and then meter count Konica 8031 - Press the utility button and then meter count Konica 8050 - Press "P" on control panel. Meter will show on digital screen. It will show "Full color counter" and "Mono (B&W) counter" Konica C350 - Press counter button Konica Minolta 160 - Press status key, Will ask "total page ok?" press yes. Gives total count and total scan. We only need total count. Konica Minolta 180 / 181 - Utility / Counter button, total counter Konica Minolta 361 - Utility / Counter button, total counter Konica Minolta 420 - Utility / Counter button, total counter Konica Minolta 421 - Utility / Counter button, total counter Konica Minolta 500 - Utility / Counter button, total counter Konica Minolta 501 - Utility / Counter button, total counter Konica Minolta 601 - Utility / Counter button, total counter Konica Minolta 751 - Utility / Counter button, total counter Konica Minolta 1050 / 1050E - Utility / Counter button, total counter Konica Minolta 7022 - Open door on right side of copier. Odometer in top right corner - look hard, it's small. Konica Minolta 7218 - press status key. Will ask "total page ok?" press yes. Gives total count and total scan. We only need total count. Konica Minolta 7222 - Open door on the right side of copier near bypass tray. The meter is in the top right corner near the hinge. Konica Minolta 7228 - Open door near the bypass tray. The odometer is in the upper left corner. Konica Minolta 7135 - open door on right side of copier near bypass tray top right corner near hinger is odometer Konica Minolta 7235 - open door on right side of copier near bypass tray top right corner near hinger is odometer Konica Minolta 7255 - Press "P" on the control panel. meter will show on digital screen. Konica Minolta 7272 - Press "P" on the control panel. meter will show on digital screen. Konica Minolta 8050 - Press "P" on control panel. Meter will show on digital screen. It will show "Full color counter" and "Mono (B&W) counter" Konica Minolta C203 / C252 / C253 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C300 / C352 / C353 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C350 - Press counter button. Konica Minolta C250 - Press Utility button then Counter List Konica Minolta C351 - Press Utility button then Counter List Konica Minolta C450 - Press Utility button then Counter List Konica Minolta C451 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C500 - press P on control panel need full color counter & mono color counter add those together for total color count monochrome counter is for b&w Konica Minolta C550 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C5500 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C650 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C6500 - Utility / Counter button, meter count. We need the black and the color separately Konica Minolta C2001 - Press Utility button then Meter count Konica Minolta 200 / 250 / 350 - Press Utility button then Counter List, need total count Konica Minolta 600 / 750 / 920 - Press Utility button then Counter List, need total countKyocera Mita Meter Reading InstructionsKyocera Mita 3830 - Press Menu, arrow down to "status page", press "enter" twice and page will print. Kyocera Mita 5016 - Press Menu, arrow down to "status page", press "enter" twice and page will print. Kyocera Mita 5035 - Press counter buttonDataproducts Meter Reading InstructionsDDS32 - DATAPRODUCTS - Press online button, press print status, meters on first page. DDS50 - DATAPRODUCTS - Press online button, press print status, meters on first page.Minolta Meter Reading InstructionsMinolta C1501 - Power button or utility button, meter count Minolta C2001 - Utility button, meter count Minolta CF900 - Halfway down on the left side, user mode, meter reading, prints, copies Minolta Di181 - On operations panel, button says "meter count" Minolta Di250 - Utility button, meter count Minolta Di350 - Utility button, meter count Minolta Di450 - The meter is under the power button Minolta Di520 - Halfway down on the big door, or press utility button, meter count Minolta Di550 - The meter is under the power button Minolta Di620 - Halfway down on the big door, or press utility button, meter count Minolta C201P - Utility / counter button, meter count. We need the black and the color separately Minolta DI250F - Right hand side of display, on side. Minolta DI351 - Right hand side of display, on sideSamsung Meter Reading Instructions6555N - SAMSUNG - Touch machine set-up button. Touch machine status on display. Touch machine info on display. Select usage counters. We want impressions. B&W and color if a color copier, or total impressions if B&W copier. 8380N - SAMSUNG - Touch machine set-up button. Touch machine status on display. Touch machine info on display. Select usage counters. We want impressions. B&W and color if a color copier, or total impressions if B&W copier.Panasonic Meter Reading InstructionsPanasonic 150 - Press % key and clear/stop at the same time, the meter should appear on the digital screen. Panasonic 150A - Press % key and clear/stop at the same time, the meter should appear on the digital screen. Panasonic 150FX - Press % key and clear/stop at the same time, the meter should appear on the digital screen. Panasonic 150PA - Press % key and clear/stop at the same time, the meter should appear on the digital screen. Panasonic D2500 - Open the front panel, meter should be in lower left corner Panasonic D620S - Halfway down on the big door. Or press utility button, meter count. Panasonic 1510 - Press copy size and paper trays keys simultaneously to view the meter count.Ricoh Meter Reading InstructionsRicoh 3506 - Press and hold the "counter" button Ricoh 4006 - Press and hold the "counter" button Ricoh 4106 - Press and hold the "counter" buttonSharp Meter Reading InstructionsSharp 168D - Press menu key then scroll to "Total Counter", Press "Enter" and the meter will appear. Sharp 168S - Press menu key then scroll to "Total Counter", Press "Enter" and the meter will appear. Sharp 1430 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2014 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2020 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2022 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2025 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2027 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2030 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 2035 - Press the clear key (orange key), the interrupt key and the clear key again. Enter the Key Operator Code (or 00000). Enter 29 and press the start key. Press 1 to display the total copy count. Sharp 2040 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. Sharp 2050 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. Sharp 2052 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. Sharp 2060 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. Sharp 2075 - Simultaneously press the Clear/Stop and Program keys. Enter the Key Operator Code (or 00000). Enter 29 and press the Start key twice to display the copy count. To exit, press the Clear All key. Sharp 2114 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2116 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2118 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2120 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2214 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2260 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 2275 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 2314 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2414 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2514 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 2530 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 3062 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 5125 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 5132A - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. Sharp 7370 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp 7855 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed. (include all zeros). Read all six digits in consecutive order. Sharp AR335 - On touch pad, touch "Custom settings", touch "key operator", enter the Key operator code (or 00000) on the key pad, press "Total Count" on the touch pad. Meter will be displayed. Sharp AR336 - Lower left corner of the key pad, hold copy button down, reading appears on the screen. Sharp AR405 - On touch pad, touch "Custom settings", touch "key operator", enter the Key operator code (or 00000) on the key pad, press "Total Count" on the touch pad. Meter will be displayed. Sharp AR505 - Hold down copy key Sharp AR507 - Hold down copy key Sharp C150A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count Sharp C160A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count Sharp C250A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count Sharp AR-157 - Hold down clear button Sharp 3062 - copier must be in ready to copy mode, press and hold down scroll display key. Meter reading will be displayed. Sharp 208D - Press menu key then scroll to "Total Counter", Press "Enter" meter will appear Sharp 208S - Press menu key then scroll to "Total Counter", Press "Enter" meter will appear Sharp C20A - press copy button and print button --- if that does not work go to custom settings / key op mode / total count Δ